Serving the Sioux Falls area  ·  (605) 501-5034  ·  Open Mon-Sun 7am-7pm
📞 (605) 501-5034 Free Quote
Metal Roof Installation professional in Sioux Falls
4.9/5 324 verified Google reviews

Metal Roofing Contractor in Sioux Falls, SD · Licensed & Insured Professionals

Licensed & Insured, in Sioux Falls and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.

Metal Roofing Alliance Member Licensed & Insured Free Quote 24h Locally Owned Open Mon-Sun 7am-7pm in Sioux Falls and surrounding areas
+324Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available

Your Free Quote Request

Confidential · Response within 24h

✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member
Our services

Our Metal Roofing Services in Sioux Falls

All your work handled by qualified professionals in Sioux Falls

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Simple Process

How It Works in Sioux Falls

1

Call or Request a Free Quote

Reach us by phone at (605) 501-5034 or fill out the estimate form. We get back to you within 24 hours, no commitment required.

2

We Assess On-Site

Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.

3

We Do the Work and Clean Up

Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.

Why choose us?

Trusted metal roof installation, repair, and replacement service in Sioux Falls

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

+324
satisfied clients
4.9/5Google Rating
10Years in Business
📞 (605) 501-5034

Available Mon-Sun 7am-7pm

Service Areas

Service Areas: Sioux Falls and surrounding communities

We serve in Sioux Falls and surrounding areas · On-site visits included · Free estimate within 24h

See all our service areas →

Team Sioux Falls Metal Roofing in Sioux Falls
✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured ⭐ 324+ reviews
About us

Your trusted service in Sioux Falls

Sioux Falls Metal Roofing is a team of local certified professionals based in Sioux Falls. We respond quickly in Sioux Falls and surrounding areas with professional equipment suited to every job.

Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.

📞 Call (605) 501-5034
Verified client reviews

324+ Verified Client Reviews in Sioux Falls

⭐⭐⭐⭐⭐ 4.9/5 · 324 verified Google reviews

Before & after results

Our work in Sioux Falls: before & after results

Real photos of our work in Sioux Falls · Each image shows the final result achieved for our clients

Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Result metal roofing in Sioux Falls - Sioux Falls Metal Roofing
Rates in Sioux Falls

Our Metal Roofing Rates in Sioux Falls · 2026 Pricing Guide

Indicative estimates: your free personalized quote is always exact

Our Rates for Metal Roof Installation in Sioux Falls

Service / CriteriaIndicative RateDetails
Exposed-fastener panel installStarting at $8/sq ftIncludes underlayment, gasketed screws, and trim; moves up with roof pitch and deck repairs.
Standing seam installStarting at $12/sq ftConcealed fasteners, full ice barrier, and custom trim; steep slopes and dormers add labor.
Metal shingle or stone-coated steelStarting at $11/sq ftStamped profile panels with matching trim; historic district review can affect lead time.
Complex or large-scale jobOn estimateMulti-gable, steep, or limited-access roofs need an on-site look before we commit to a number.
TravelIncludedin Sioux Falls and surrounding Minnehaha County communities, with no separate mileage fee.
EstimateFreeResponse within 24 hours at (605) 501-5034, with no obligation to book.

Our Rates for Standing Seam Metal Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Standing seam, standard gableStarting at $10/sq ftIncludes panels, underlayment, flashing and cleanup on a simple roof with good access.
Standing seam, cut-up roofStarting at $13/sq ftMore valleys, dormers and chimneys mean more labor, flashing and seaming time per square.
Class 4 impact upgradeAdds $1 to $2/sq ftHeavier gauge and impact-rated finish for homes that keep filing hail claims.
Retrofit over existing shinglesOn estimateCode limits existing layers, so we inspect the deck and layer count before quoting.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Metal Roof Replacement in Sioux Falls

Service / CriteriaIndicative RateDetails
Full tear-off and replacement, basic ranch or split-levelStarting at $9/sq ftIncludes tear-off, haul-away, deck inspection, underlayment, and standard metal panel system.
Standing seam replacementStarting at $12/sq ftConcealed fasteners, raised seams, and premium finish; higher material cost than exposed-fastener panels.
Stone-coated steel or metal shingle replacementStarting at $11/sq ftIncludes traditional-look panels for HOA or historic district review; complex valleys add labor.
Complex or large-scale replacementOn estimateSteep pitch, multiple dormers, extensive deck repair, or historic quartzite walls need an on-site look.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24 hours at (605) 501-5034, no obligation to book.

Our Rates for Metal Roof Over Shingles (Retrofit) in Sioux Falls

Service / CriteriaIndicative RateDetails
Exposed-fastener retrofit over one shingle layerStarting at $7/sq ftIncludes slip sheet, purlins, panels, and standard flashing on a sound deck.
Standing seam retrofit over shinglesStarting at $11/sq ftConcealed fasteners and strapping, priced higher for premium panels and cleaner lines.
Stone-coated steel retrofitStarting at $10/sq ftTextured panels for HOA or historic-district approval, includes separation layer and trim.
Deck repair and partial tear-offOn estimateNeeds an on-site look because rot and soft sheathing vary widely house to house.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Metal Roof Repair in Sioux Falls

Service / CriteriaIndicative RateDetails
Minor repair (fasteners, sealant, small flashing)Starting at $450Covers a small crew visit, failed screw replacement, resealed penetration, and a basic leak trace.
Single panel replacementStarting at $850Includes matching panel, removal, install, and resealing; price moves with roof pitch and access.
Storm or hail damage repair (multiple panels)On estimateNeeds an on-site look to count panels, check underlayment, and document damage for insurance.
Flashing, chimney, or skylight repairStarting at $650Rebuilds flashing and sealant at penetrations; cost rises with chimney height and roof access.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Metal Roof Leak Repair in Sioux Falls

Service / CriteriaIndicative RateDetails
Minor leak repair (fasteners, sealant, small flashing)Starting at $450Covers diagnosis, failed screw replacement, and resealing at one leak point, access permitting
Flashing and skylight rebuildStarting at $850Rebuilds step and counterflashing at a chimney or skylight, price rises with roof pitch and height
Seam repair on standing seamStarting at $650Reseats and reseals lifted seams, cost moves with linear footage and panel accessibility
Panel replacement after storm damageOn estimateHail or wind damage needs an on-site look to match panel profile and color
Emergency tarpingStarting at $350Secures an active leak after hail or wind, priced by roof size and urgency
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book

Our Rates for Screw Replacement & Re-Fastening in Sioux Falls

Service / CriteriaIndicative RateDetails
Spot screw replacement (small section)Starting at $750Includes inspection, marking, and replacement of loose or stripped screws on one roof section.
Full screw and washer replacement (house)Starting at $1,800Every fastener pulled and replaced with new sealing washers, priced by roof size and pitch.
Barn, shed, or agricultural buildingStarting at $1,200Long panel runs and steel girts, priced by square footage and access to the roof.
Oversized screw retrofitOn estimateNeeds an on-site look to confirm hole condition and deck integrity before quoting.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Corrugated & Ribbed Panel Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Corrugated panel roof, simple outbuildingStarting at $5.50/sq ftIncludes panels, fasteners, closures, and standard trim on a straightforward shed or barn
R-panel roof, shop or commercial buildingStarting at $6.25/sq ftIncludes high-wind screw pattern, ridge and eave trim, and penetration flashing
Re-fastening and screw replacementStarting at $1.75/sq ftIncludes new screws and washers with a tighter pattern on sound existing panels
Tear-off and disposalQuoted per jobDepends on existing layers, panel length, and dump fees for the building
Complex or large-scale jobOn estimateSkylights, HVAC curbs, and steep pitches need an on-site look before pricing
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book

Our Rates for Metal Shingle Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Metal shingle install, standard profileStarting at $9/sq ftIncludes tear-off, underlayment, ice shield, shingles, flashing, and disposal on an accessible roof.
Slate or shake profile upgradeStarting at $12/sq ftPremium textured panels and tighter course layout raise material and labor cost per square.
Deck repair or re-deckOn estimateSoft sheathing, rotten fascia, or added ice shield at valleys are priced after the deck inspection.
Metal shingle repair or leak callStarting at $350Covers diagnosis, sealant, and minor shingle replacement; larger storm damage quoted on site.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Stone-Coated Steel Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Stone-coated steel roof replacement (full tear-off)From $9/sq ftIncludes tear-off, deck inspection, underlayment, panels, and standard flashing on a walkable roof.
Stone-coated steel retrofit over existing shinglesFrom $7.50/sq ftIncludes panel install over one sound shingle layer where code allows, with new eave and ridge trim.
Stone-coated steel repair and re-fasteningFrom $450Includes damaged panel replacement, fastener replacement, and resealing at penetrations and valleys.
Complex or large-scale jobOn estimateSteep pitches, dormers, multiple valleys, and historic district details need an on-site look first.
TravelIncludedIn Sioux Falls and surrounding areas, with no separate call-out or mileage fee.
EstimateFreeResponse within 24 hours at (605) 501-5034, with no obligation to book.

Our Rates for Copper & Specialty Metal Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Copper porch or bay window roofStarting at $20/sq ftIncludes custom fabrication and soldered flashing; access and deck condition move the price.
Zinc or aluminum accent roofStarting at $18/sq ftLighter metal for turrets and dormers; complexity of the profile is the main cost factor.
Full copper roofOn estimatePriced after an on-site measure of every plane, seam, and flashing detail.
Repair or patchingStarting at $650Covers solder repairs and small panel replacement; extent of hidden damage affects the final number.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Metal Roof Coating & Painting in Sioux Falls

Service / CriteriaIndicative RateDetails
Acrylic coating systemStarting at $2.50/sq ftIncludes cleaning, rust treatment, fastener check, and one topcoat on sound panels.
Elastomeric coating systemStarting at $3.25/sq ftThicker film for older roofs with seam movement and minor fastener ponding.
Rust treatment and spot repairStarting at $450Wire-brush, rust converter, primer, and touch-up on isolated rust areas.
Fastener replacement add-onStarting at $2 per screwRe-seat or replace loose and rusted screws before coating to stop leaks.
Complex or large agricultural roofOn estimateSteep pitch, multiple penetrations, or heavy pitting needs an on-site look first.
Travel and estimateIncluded and freeNo mileage fee in Sioux Falls and surrounding towns, free no-obligation estimate.

Our Rates for Flashing, Chimney & Skylight Repair in Sioux Falls

Service / CriteriaIndicative RateDetails
Single detail flashing repairStarting at $600Covers one chimney counterflashing or skylight curb on an accessible roof, with new sealant and fasteners.
Skylight curb rebuildStarting at $850New curb flashing, underlayment, and tie-in to the panel field, priced by skylight count and roof pitch.
Full chimney re-flash with custom metalStarting at $1,200Two-piece bent counterflashing and step flashing fitted to masonry, higher on tall quartzite stacks.
Multiple penetrations or valley workOn estimateNeeds an on-site look to count details, check panel removal, and confirm underlayment condition before pricing.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Snow Guards & Ice Protection in Sioux Falls

Service / CriteriaIndicative RateDetails
Pad guards on a single-story homeStarting at $1,200Covers a focused run of pad guards over entries and walkways, sized to roof pitch and panel type
Bar rails on a steep or two-story roofStarting at $1,850Continuous rails above the eave, priced by linear feet and roof access difficulty
Eave ice protection add-onStarting at $650Edge detailing and underlayment work at the gutter line to manage ice dams and meltwater
Combination system on a complex roofOn estimateDormers, valleys, and multiple drop zones need an on-site layout before pricing
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book

Our Rates for Storm & Wind Damage Repair in Sioux Falls

Service / CriteriaIndicative RateDetails
Storm damage inspectionFreeFull roof, flashing, and fastener inspection with photo documentation and a written repair-versus-replace recommendation
Minor repair (fasteners, trim, single panel)Starting at $350Includes screw and washer replacement or one panel swap, priced by roof height and access
Multi-panel or partial slope repairStarting at $900Covers several panels plus flashing and trim, with cost driven by panel profile and matching material availability
Full replacement after storm damageOn estimateNeeds an on-site look because roof size, pitch, panel type, and insurance scope all affect the number
TravelIncludedin Sioux Falls and surrounding areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book

Our Rates for Metal Roof Inspection in Sioux Falls

Service / CriteriaIndicative RateDetails
Residential walk-over inspectionFree estimateFull roof-level check of panels, seams, fasteners, and flashing with a written photo report included.
Hail and storm damage assessmentStarting at $250Impact and wind damage documentation for insurance, priced by roof size and number of slopes.
Leak tracing inspectionStarting at $300Systematic search for an active leak source, priced by roof complexity and penetrations.
Pre-sale or insurance reportOn estimateWritten report with remaining service life needs an on-site look before we quote a number.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Gutters for Metal Roofs in Sioux Falls

Service / CriteriaIndicative RateDetails
Seamless aluminum gutter, standard runStarting at $9/linear ftIncludes 5-inch trough, hidden screw hangers, and standard downspout layout on an accessible roof.
Half-round steel or aluminumStarting at $14/linear ftPeriod-correct profile with heavier hangers, priced higher on tall Victorian and quartzite facades.
Oversized box gutter and 4-inch downspoutsStarting at $18/linear ftHigh-flow commercial and agricultural setup; cost moves with run length and outlet count.
Snow guard and gutter comboOn estimateGuard layout depends on panel profile, pitch, and where snow actually releases above the run.
TravelIncludedIn Sioux Falls and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (605) 501-5034, no obligation to book.

Our Rates for Commercial & Agricultural Metal Roofing in Sioux Falls

Service / CriteriaIndicative RateDetails
Roof inspection and estimateFreeOn-site walk of the building with panel and fastener assessment, no obligation to book
Screw replacement and re-fasteningStarting at $450Includes washered screw replacement on accessible slopes; roof size and access move the price
Panel repair and leak repairStarting at $650Covers flashing, sealant, and panel patching; height, pitch, and leak location affect the total
Recover over existing roofOn estimateNeeds an on-site look at existing layers, framing, and code limits before a number is given
Full panel replacementOn estimatePanel type, roof square footage, insulation, and tear-off scope drive the final figure
TravelIncludedin Sioux Falls and surrounding counties, with no separate call-out or mileage fee

Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.

See full pricing guide →

Metal Roofing Contractor in Sioux Falls, SD

Homeowners searching for a metal roofing contractor near me in Sioux Falls need a crew that understands what roofs face here: brutal blizzard cycles, heavy snow and ice dams at the eaves, spring hail, and plains wind strong enough to peel panels. Sioux Falls Metal Roofing is built for exactly that. We handle metal roof installation, full replacement, re-roofs, and repairs on steep-pitch homes, and we know the large stock of 15 to 30 year old exposed-fastener roofs around the city where fasteners are backing out.

From the quartzite Victorians near the Cathedral district to post-war ranches on the east side and new two-story builds in the southwest, we match the system to the house. We serve Sioux Falls, Brandon, Hartford, Dell Rapids, Crooks, and the surrounding Minnehaha and Lincoln county areas. If you want straight guidance instead of a sales pitch, call (605) 501-5034 or request a free estimate.

Metal Roof Repair, Leaks & Screw Replacement in Sioux Falls

Most metal roof leaks in Sioux Falls trace back to a handful of causes, and the number one culprit on 15 to 30 year old exposed-fastener roofs is fasteners backing out as the EPDM sealing washers dry, shrink, and crack. Once that seal fails, water works past the screw head. The second common cause is seam separation from thermal movement, where panels expand and contract through freeze-thaw cycles until seams open. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable transitions, and wind-lifted panels or punctures from fallen cottonwood and ash limbs finish the list.

Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling is rarely where the roof is failing. By the time it shows, you may be looking at rotted sheathing and saturated insulation. That is why we chase the source, not the stain, and document what we find before recommending work.

The honest call between repair and replacement matters. On many older screw-down roofs, a full screw replacement and re-fastening restores a watertight roof for a fraction of replacement cost, and that is often the right answer. When panels are perforated, seams are too far gone, or the deck is soft, we say so plainly. For active leaks, call (605) 501-5034 or reach out for an inspection.

Metal Roofing Systems We Install in Sioux Falls

We install the full range of metal systems, and the right one depends on the house, the budget, and how much maintenance you want to own. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for primary homes. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, machine sheds, workshops, and cabins. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.

The honest comparison: standing seam costs more up front but has no exposed screws to service over its life, while screw-down costs less and needs its fasteners checked and replaced periodically. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off; when it is not, we tear off and start clean.

How Much Does a Metal Roof Cost in Sioux Falls?

Metal roof pricing in Sioux Falls is usually quoted per square foot for installations, while repairs are often flat-rate. What moves the number is the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around the home. Typical ranges vary widely, and final pricing depends on the roof and site conditions, so we measure and inspect before quoting rather than guessing from the driveway.

Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. For a clearer picture of how projects are priced, see our pricing page, then request a free estimate or free roof inspection so we can give you real numbers for your home.

Storm Damage, Insurance Claims & Permits in Sioux Falls

After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. What we can do is document damage accurately so you have solid information to work with.

On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color choices. We are glad to point you in the right direction, but requirements vary, so always verify with the Sioux Falls building or planning department before starting your project. Have questions? Contact us and we will walk you through what we know.

Ready to get started? Sioux Falls Metal Roofing serves in Sioux Falls and surrounding areas. Get your free, no-obligation estimate today.

Get a Free Estimate
Free Quote

Get Your Free Quote

Metal Roofing in Sioux Falls · Response within 24h · No commitment · ☎ (605) 501-5034

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Sioux Falls ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm
Frequently asked questions

Your questions about our services in Sioux Falls

How much does metal roof installation cost in Sioux Falls?
Metal roof costs in Sioux Falls depend on the roof size, panel type, slope, and whether old shingles are removed or covered, so most projects fall in a wide range rather than a single price. We provide a free, itemized estimate for your specific property so you know the material and labor breakdown before committing.
Do you offer free metal roof estimates in Sioux Falls?
Yes, we provide free on-site estimates for metal roof installation, replacement, and repair throughout Sioux Falls. We inspect the roof, measure the structure, and give you a written quote with no obligation.
How quickly can you respond to a metal roof leak or storm damage in Sioux Falls?
We prioritize active leaks and storm damage in Sioux Falls and typically schedule same-day or next-day assessments when weather allows. For urgent leaks, call (605) 501-5034 and we will work to get a crew out as fast as possible to stop further damage.
What areas around Sioux Falls do you serve for metal roofing?
We serve Sioux Falls and the surrounding communities within a reasonable drive of the city, including nearby towns and rural properties. If you are unsure whether your location is covered, call us and we will confirm before scheduling.
Is your metal roofing company in Sioux Falls licensed and insured?
Yes, we carry liability insurance and workers compensation coverage for every project we perform in Sioux Falls. We are also a Metal Roofing Alliance member and can provide proof of insurance on request.
How do I find a reliable metal roofing contractor near me in Sioux Falls?
Look for a contractor near you in Sioux Falls that specializes in metal roofing, carries liability and workers comp insurance, and can show local references and manufacturer credentials. Ask about panel warranties, fastening methods, and whether they handle flashing and trim in-house, since those details drive long-term performance.
Can you install a metal roof over my existing shingles in Sioux Falls?
Yes, metal roof over shingles (retrofit) is common in Sioux Falls and can save on tear-off costs and landfill fees when the existing roof deck is sound. We inspect the deck and shingles first, then add underlayment and proper flashing so the new metal roof performs correctly.
What metal roofing maintenance should Sioux Falls homeowners do before winter?
Before winter in Sioux Falls, have the roof inspected for loose or backed-out screws, worn sealant, damaged flashing, and clogged gutters, and address any issues before snow and ice arrive. We also recommend checking snow guards and ice protection on roofs where sliding snow could damage gutters or entryways.